Visonicom V4G858M/V4G858ML is a wireless LTE router MiFi 4G WiFi router modem manufactured with built-in LTE 4G module sim card slot and battery. It universally supports both FDD and TDD duplex modes and multiple frequency bands:
FDD B1 2100MHz IMT,
FDD B2 1900MHz PCS blocks A-F,
FDD B3 1800MHz DCS,
FDD B4 1700MHz AWS blocks A-F (AWS-1),
FDD B5 850MHz CLR,
FDD B6 800MHz Japan Cell,
FDD B7 2600MHz IMT-E,
FDD B8 900MHz E-GSM,
FDD B9 1750MHz Japan DCS,
FDD B12 700MHz Lower SMH blocks A/B/C,
FDD B13 700MHz Upper SMH block C,
FDD B17 700MHz Lower SMH blocks B/C,
FDD B19 850MHz Japan upper 800,
FDD B20 800MHz EU Digital Dividend,
FDD B25 1900MHz Extended PCS blocks A-G,
FDD B26 850MHz Extended CLR,
FDD B28 700MHz APT,
TDD B38 2600MHz IMT-E (Duplex Spacing),
TDD B39 1900MHz DCS-IMT gap,
TDD B40 2300MHz,
TDD B41 2500MHz BRS/EBS,
also backward supports HSPA+/HSUPA/HSDPA/WCDMA[Band 1/5/8 (2/3/4/6/9/19 Optional)], CDMA EVDO Rev B/Rev A/CDMA(BC0/BC1), EDGE/GPRS/GSM(Quad Band).
With the built-in 4G LTE module SIM card slot, simply insert a standard 4G LTE SIM/USIM card, the travel LTE WiFi router 4G MiFi router modem works with the downlink speed up to 150Mbps and uplink 50Mbps for fast mobile 4G internet access for sharing with 10 users (recommended, max 254 users theoretically) with 150Mbps WiFi, which is also built inside.
The Built-in Micro SD card slot support up to 32GB capacity. Simply put a Micro SD card then the portable wireless 4G MiFi router LTE WiFi router modem V4G858M/V4G858ML can also works as a WiFi NAS (Network Attached Storage) so that users can access and share the files wirelessly. No need to take a USB storage nor even a USB flash driver for travel! Low-power Energy consumption enables the endurance up to 8~10 hours
The mobile WiFi 4G modem router LTE wireless MiFi router supports 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router. With the quick configuration wizard, it is easy to configure and install. The new version of the firmware is upgradable through the web UI.
Key Specification and Features:
3G/4G WiFi Router with Battery V4G858M/V4G858ML |
* Share a 3G/4G mobile WiFi connection |
* Supports TDD/FDD/TD-SCDMA/WCDMA/EVDO standards |
*Supports FDD-LTE: B1/B2/B3/B4/B5/B6/B7/B8/B9/B12/B13/B17/B19/B20/B25/B26/B28(Customizable) |
* Supports TD-LTE: B38/B39/B40/B41(Customizable) |
* Supports WCDMA: B1/B2/B5/B8(Customizable) |
* Supports TD-SCDMA: B40/B41(Customizable) |
* Supports 2.4G WiFi standard 802.11B/G/N |
* WiFi speed up to 150Mbps |
* Supports 5~10 users at the same time |
* 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router |
* 1.44" LCD screen with all useful information(V4G858M only) |
* Interface: 1 x USIM/SIM Card Slot,1 x Micro SD Card Slot |
* Button: 1 x Power On/Off, 1 x WPS, 1 x Reset |
* LED indicators: 1 x 3G/4G, 1 x WiFi, 1 x Power (V4G858ML only) |
* WPS button for fast and security WiFi connection |
* SD card slot for up to 32GB optional storage |
* 2100/3000mAh battery for 10~12 hours working |
* Customized version available |
Notes:
1. The Duplex Modes and Frequency Bands above mentioned does not mean the portable LTE router can support all of them synchronously but some bands included only, since some of them are mutual exclusive; Also the duplex modes(FDD/TDD) and frequency bands are different from area to area, operator to operator, and with different APN settings, etc. No one can cover all frequency bands and APN settings in one device for the whole globe, but we can tailor the duplex modes, frequency bands and APN settings etc for specified operators and regions.
2. Cost floats with the technical requirement and order quantity. So when making an inquiry please make it very certain for the technical data (most important, duplex modes and frequency bands), and order demand so that both sides can go ahead efficiently. Thanks.
{gallery}gallery/v4g858m{/gallery}
Visonicom V4G653M/V4G653ML is a wireless 4G router MiFi LTE WiFi router modem manufactured with built-in LTE 4G module sim card slot and battery. It universally supports both FDD and TDD duplex modes and multiple frequency bands:
FDD B1 2100MHz IMT,
FDD B2 1900MHz PCS blocks A-F,
FDD B3 1800MHz DCS,
FDD B4 1700MHz AWS blocks A-F (AWS-1),
FDD B5 850MHz CLR,
FDD B6 800MHz Japan Cell,
FDD B7 2600MHz IMT-E,
FDD B8 900MHz E-GSM,
FDD B9 1750MHz Japan DCS,
FDD B12 700MHz Lower SMH blocks A/B/C,
FDD B13 700MHz Upper SMH block C,
FDD B17 700MHz Lower SMH blocks B/C,
FDD B19 850MHz Japan upper 800,
FDD B20 800MHz EU Digital Dividend,
FDD B25 1900MHz Extended PCS blocks A-G,
FDD B26 850MHz Extended CLR,
FDD B28 700MHz APT,
TDD B38 2600MHz IMT-E (Duplex Spacing),
TDD B39 1900MHz DCS-IMT gap,
TDD B40 2300MHz,
TDD B41 2500MHz BRS/EBS,
also backward supports HSPA+/HSUPA/HSDPA/WCDMA[Band 1/5/8 (2/3/4/6/9/19 Optional)], CDMA EVDO Rev B/Rev A/CDMA(BC0/BC1), EDGE/GPRS/GSM(Quad Band).
With the built-in 4G LTE module SIM card slot, simply insert a standard 4G LTE SIM/USIM card, the portable LTE WiFi router 4G MiFi router modem works with the downlink speed up to 150Mbps and uplink 50Mbps for fast mobile 4G internet access for sharing with 10 users (recommended, max 254 users theoretically) with 150Mbps WiFi, which is also built inside.
The Built-in Micro SD card slot support up to 32GB capacity. Simply put a Micro SD card then the travel 4G MiFi wireless LTE router modem V4G653M/V4G653ML can also works as a WiFi NAS (Network Attached Storage) so that users can access and share the files wirelessly. No need to take a USB storage nor even a USB flash driver for travel! Low-power Energy consumption enables the endurance up to 8~10 hours
The mobile LTE modem router 4G wireless MiFi router supports 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router. With the quick configuration wizard, it is easy to configure and install. The new version of the firmware is upgradable through the web UI.
Key Specification and Features:
3G/4G WiFi Router with Battery V4G653M/V4G653ML |
* Share a 3G/4G mobile WiFi connection |
* Supports TDD/FDD/TD-SCDMA/WCDMA/EVDO standards |
*Supports FDD-LTE: B1/B2/B3/B4/B5/B6/B7/B8/B9/B12/B13/B17/B19/B20/B25/B26/B28(Customizable) |
* Supports TD-LTE: B38/B39/B40/B41(Customizable) |
* Supports WCDMA: B1/B2/B5/B8(Customizable) |
* Supports TD-SCDMA: B40/B41(Customizable) |
* Supports 2.4G WiFi standard 802.11B/G/N |
* WiFi speed up to 150Mbps |
* Supports 5~10 users at the same time |
* 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router |
* 1.44" LCD screen with all useful information(V4G653M only) |
* Interface: 1 x USIM/SIM Card Slot,1 x Micro SD Card Slot |
* Button: 1 x Power On/Off, 1 x WPS, 1 x Reset |
* LED indicators: 1 x 3G/4G, 1 x WiFi, 1 x Power (V4G653ML only) |
* WPS button for fast and security WiFi connection |
* SD card slot for up to 32GB optional storage |
* 2100/3000mAh battery for 10~12 hours working |
* Customized version available |
Notes:
1. The Duplex Modes and Frequency Bands above mentioned does not mean the portable LTE router can support all of them synchronously but some bands included only, since some of them are mutual exclusive; Also the duplex modes(FDD/TDD) and frequency bands are different from area to area, operator to operator, and with different APN settings, etc. No one can cover all frequency bands and APN settings in one device for the whole globe, but we can tailor the duplex modes, frequency bands and APN settings etc for specified operators and regions.
2. Cost floats with the technical requirement and order quantity. So when making an inquiry please make it very certain for the technical data (most important, duplex modes and frequency bands), and order demand so that both sides can go ahead efficiently. Thanks.
{gallery}gallery/v4g653m{/gallery}
Visonicom V4G555M/V4G555ML is a 4G router WiFi LTE MiFi router modem manufactured with built-in LTE 4G module sim card slot and battery. It supports both FDD and TDD duplex modes and multiple frequency bands:
FDD B1 2100MHz IMT,
FDD B2 1900MHz PCS blocks A-F,
FDD B3 1800MHz DCS,
FDD B4 1700MHz AWS blocks A-F (AWS-1),
FDD B5 850MHz CLR,
FDD B6 800MHz Japan Cell,
FDD B7 2600MHz IMT-E,
FDD B8 900MHz E-GSM,
FDD B9 1750MHz Japan DCS,
FDD B12 700MHz Lower SMH blocks A/B/C,
FDD B13 700MHz Upper SMH block C,
FDD B17 700MHz Lower SMH blocks B/C,
FDD B19 850MHz Japan upper 800,
FDD B20 800MHz EU Digital Dividend,
FDD B25 1900MHz Extended PCS blocks A-G,
FDD B26 850MHz Extended CLR,
FDD B28 700MHz APT,
TDD B38 2600MHz IMT-E (Duplex Spacing),
TDD B39 1900MHz DCS-IMT gap,
TDD B40 2300MHz,
TDD B41 2500MHz BRS/EBS,
also backward supports HSPA+/HSUPA/HSDPA/WCDMA[Band 1/5/8 (2/3/4/6/9/19 Optional)], CDMA EVDO Rev B/Rev A/CDMA(BC0/BC1), EDGE/GPRS/GSM(Quad Band).
With the built-in 4g module SIM card slot, simply insert a standard 4G/LTE SIM/USIM card, the travel 4G WiFi router LTE MiFi router modem works with the downlink speed up to 150Mbps and uplink 50Mbps for fast mobile 4G internet access for sharing with 10 users (recommended, max 254 users theoretically) with 150Mbps WiFi, which is also built inside.
The Built-in Micro SD card slot support up to 32GB capacity. Simply put a Micro SD card then the portable 4G MiFi wireless SIM router LTE V4G555M/V4G555ML can also works as a WiFi NAS (Network Attached Storage) so that users can access and share the files wirelessly. No need to take a USB storage nor even a USB flash driver for travel! Low-power Energy consumption enables the endurance up to 8~10 hours
The mobile 4G modem router LTE MiFi router wireless 4G supports 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router. With the quick configuration wizard, it is easy to configure and install. The new version of the firmware is upgradable through the web UI.
Key Specification and Features:
3G/4G WiFi Router with Battery V4G555M/V4G555ML |
* Share a 3G/4G mobile WiFi connection |
* Supports TDD/FDD/TD-SCDMA/WCDMA/EVDO standards |
*Supports FDD-LTE: B1/B2/B3/B4/B5/B6/B7/B8/B9/B12/B13/B17/B19/B20/B25/B26/B28(Customizable) |
* Supports TD-LTE: B38/B39/B40/B41(Customizable) |
* Supports WCDMA: B1/B2/B5/B8(Customizable) |
* Supports TD-SCDMA: B40/B41(Customizable) |
* Supports 2.4G WiFi standard 802.11B/G/N |
* WiFi speed up to 150Mbps |
* Supports 5~10 users at the same time |
* 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router |
* 1.44" LCD screen with all useful information(V4G555M only) |
* Interface: 1 x USIM/SIM Card Slot,1 x Micro SD Card Slot |
* Button: 1 x Power On/Off, 1 x WPS, 1 x Reset |
* LED indicators: 1 x 3G/4G, 1 x WiFi, 1 x Power (V4G555ML only) |
* WPS button for fast and security WiFi connection |
* SD card slot for up to 32GB optional storage |
* 2100/3000mAh battery for 10~12 hours working |
* Customized version available |
Notes:
1. The Duplex Modes and Frequency Bands above mentioned does not mean the portable LTE router can support all of them synchronously but some bands included only, since some of them are mutual exclusive; Also the duplex modes(FDD/TDD) and frequency bands are different from area to area, operator to operator, and with different APN settings, etc. No one can cover all frequency bands and APN settings in one device for the whole globe, but we can tailor the duplex modes, frequency bands and APN settings etc for specified operators and regions.
2. Cost floats with the technical requirement and order quantity. So when making an inquiry please make it very certain for the technical data (most important, duplex modes and frequency bands), and order demand so that both sides can go ahead efficiently. Thanks.
{gallery}gallery/v4g555m{/gallery}
Visonicom V4G554M/V4G554ML is a WiFi 4G router MiFi LTE modem router manufactured with built-in 4G LTE module sim card slot and battery. It supports both FDD and TDD duplex modes and multiple frequency bands:
FDD B1 2100MHz IMT,
FDD B2 1900MHz PCS blocks A-F,
FDD B3 1800MHz DCS,
FDD B4 1700MHz AWS blocks A-F (AWS-1),
FDD B5 850MHz CLR,
FDD B6 800MHz Japan Cell,
FDD B7 2600MHz IMT-E,
FDD B8 900MHz E-GSM,
FDD B9 1750MHz Japan DCS,
FDD B12 700MHz Lower SMH blocks A/B/C,
FDD B13 700MHz Upper SMH block C,
FDD B17 700MHz Lower SMH blocks B/C,
FDD B19 850MHz Japan upper 800,
FDD B20 800MHz EU Digital Dividend,
FDD B25 1900MHz Extended PCS blocks A-G,
FDD B26 850MHz Extended CLR,
FDD B28 700MHz APT,
TDD B38 2600MHz IMT-E (Duplex Spacing),
TDD B39 1900MHz DCS-IMT gap,
TDD B40 2300MHz,
TDD B41 2500MHz BRS/EBS,
also backward supports HSPA+/HSUPA/HSDPA/WCDMA[Band 1/5/8 (2/3/4/6/9/19 Optional)], CDMA EVDO Rev B/Rev A/CDMA(BC0/BC1), EDGE/GPRS/GSM(Quad Band).
With the built-in 4g module SIM card slot, simply insert a standard 4G LTE SIM/USIM card, the portable WiFi 4G LTE router works with the downlink speed up to 150Mbps and uplink 50Mbps for fast mobile 4G internet access for sharing with 10 users (recommended, max 254 users theoretically) with 150Mbps WiFi, which is also built inside.
The Built-in Micro SD card slot support up to 32GB capacity. Simply put a Micro SD card then the mobile 4G MiFi wireless SIM router LTE V4G554M/V4G554ML can also works as a WiFi NAS (Network Attached Storage) so that users can access and share the files wirelessly. No need to take a USB storage nor even a USB flash driver for travel! Low-power Energy consumption enables the endurance up to 8~10 hours
The LTE modem router LTE MiFi router wireless 4G supports 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router. With the quick configuration wizard, it is easy to configure and install. The new version of the firmware is upgradable through the web UI.
Key Specification and Features:
3G/4G WiFi Router with Battery V4G554M/V4G554ML |
* Share a 3G/4G mobile WiFi connection |
* Supports TDD/FDD/TD-SCDMA/WCDMA/EVDO standards |
*Supports FDD-LTE: B1/B2/B3/B4/B5/B6/B7/B8/B9/B12/B13/B17/B19/B20/B25/B26/B28(Customizable) |
* Supports TD-LTE: B38/B39/B40/B41(Customizable) |
* Supports WCDMA: B1/B2/B5/B8(Customizable) |
* Supports TD-SCDMA: B40/B41(Customizable) |
* Supports 2.4G WiFi standard 802.11B/G/N |
* WiFi speed up to 150Mbps |
* Supports 5~10 users at the same time |
* 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router |
* 1.44" LCD screen with all useful information(V4G554M only) |
* Interface: 1 x USIM/SIM Card Slot,1 x Micro SD Card Slot |
* Button: 1 x Power On/Off, 1 x WPS, 1 x Reset |
* LED indicators: 1 x 3G/4G, 1 x WiFi, 1 x Power (V4G554ML only) |
* WPS button for fast and security WiFi connection |
* SD card slot for up to 32GB optional storage |
* 2100/3000mAh battery for 10~12 hours working |
* Customized version available |
Notes:
1. The Duplex Modes and Frequency Bands above mentioned does not mean the portable LTE router can support all of them synchronously but some bands included only, since some of them are mutual exclusive; Also the duplex modes(FDD/TDD) and frequency bands are different from area to area, operator to operator, and with different APN settings, etc. No one can cover all frequency bands and APN settings in one device for the whole globe, but we can tailor the duplex modes, frequency bands and APN settings etc for specified operators and regions.
2. Cost floats with the technical requirement and order quantity. So when making an inquiry please make it very certain for the technical data (most important, duplex modes and frequency bands), and order demand so that both sides can go ahead efficiently. Thanks.
{gallery}gallery/v4g554m{/gallery}
Visonicom V4G553M/V4G553ML is a WiFi LTE router MiFi 4G modem router manufactured with built-in 4G/LTE module sim card slot and battery. It supports both FDD and TDD duplex modes and multiple frequency bands:
FDD B1 2100MHz IMT,
FDD B2 1900MHz PCS blocks A-F,
FDD B3 1800MHz DCS,
FDD B4 1700MHz AWS blocks A-F (AWS-1),
FDD B5 850MHz CLR,
FDD B6 800MHz Japan Cell,
FDD B7 2600MHz IMT-E,
FDD B8 900MHz E-GSM,
FDD B9 1750MHz Japan DCS,
FDD B12 700MHz Lower SMH blocks A/B/C,
FDD B13 700MHz Upper SMH block C,
FDD B17 700MHz Lower SMH blocks B/C,
FDD B19 850MHz Japan upper 800,
FDD B20 800MHz EU Digital Dividend,
FDD B25 1900MHz Extended PCS blocks A-G,
FDD B26 850MHz Extended CLR,
FDD B28 700MHz APT,
TDD B38 2600MHz IMT-E (Duplex Spacing),
TDD B39 1900MHz DCS-IMT gap,
TDD B40 2300MHz,
TDD B41 2500MHz BRS/EBS,
also backward supports HSPA+/HSUPA/HSDPA/WCDMA[Band 1/5/8 (2/3/4/6/9/19 Optional)], CDMA EVDO Rev B/Rev A/CDMA(BC0/BC1), EDGE/GPRS/GSM(Quad Band).
With the built-in 4g module SIM card slot, simply insert a standard 4G SIM/USIM card, the portable WiFi LTE 4G router works with the downlink speed up to 150Mbps and uplink 50Mbps for fast mobile 4G internet access for sharing with 10 users (recommended, max 254 users theoretically) with 150Mbps WiFi, which is also built inside.
The Built-in Micro SD card slot support up to 32GB capacity. Simply put a Micro SD card then the mobile LTE MiFi wireless 4G router V4G553M/V4G553ML can also works as a WiFi NAS (Network Attached Storage) so that users can access and share the files wirelessly. No need to take a USB storage nor even a USB flash driver for travel! Low-power Energy consumption enables the endurance up to 8~10 hours
The LTE modem router 4g MiFi router supports 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router. With the quick configuration wizard, it is easy to configure and install. The new version of the firmware is upgradable through the web UI.
Key Specification and Features:
3G/4G WiFi Router with Battery V4G553M/V4G553ML |
* Share a 3G/4G mobile WiFi connection |
* Supports TDD/FDD/TD-SCDMA/WCDMA/EVDO standards |
*Supports FDD-LTE: B1/B2/B3/B4/B5/B6/B7/B8/B9/B12/B13/B17/B19/B20/B25/B26/B28(Customizable) |
* Supports TD-LTE: B38/B39/B40/B41(Customizable) |
* Supports WCDMA: B1/B2/B5/B8(Customizable) |
* Supports TD-SCDMA: B40/B41(Customizable) |
* Supports 2.4G WiFi standard 802.11B/G/N |
* WiFi speed up to 150Mbps |
* Supports 5~10 users at the same time |
* 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router |
* 1.44" LCD screen with all useful information(V4G553M only) |
* Interface: 1 x USIM/SIM Card Slot,1 x Micro SD Card Slot |
* Button: 1 x Power On/Off, 1 x WPS, 1 x Reset |
* LED indicators: 1 x 3G/4G, 1 x WiFi, 1 x Power (V4G553ML only) |
* WPS button for fast and security WiFi connection |
* SD card slot for up to 32GB optional storage |
* 2100/3000mAh battery for 10~12 hours working |
* Customized version available |
Notes:
1. The Duplex Modes and Frequency Bands above mentioned does not mean the portable LTE router can support all of them synchronously but some bands included only, since some of them are mutual exclusive; Also the duplex modes(FDD/TDD) and frequency bands are different from area to area, operator to operator, and with different APN settings, etc. No one can cover all frequency bands and APN settings in one device for the whole globe, but we can tailor the duplex modes, frequency bands and APN settings etc for specified operators and regions.
2. Cost floats with the technical requirement and order quantity. So when making an inquiry please make it very certain for the technical data (most important, duplex modes and frequency bands), and order demand so that both sides can go ahead efficiently. Thanks.
{gallery}gallery/v4g553m{/gallery}
Visonicom V4G552M/V4G552ML is a LTE WiFi router 4G MiFi router manufactured with built-in 4G/LTE module sim card slot and battery. It supports both FDD and TDD duplex modes and multiple frequency bands:
FDD B1 2100MHz IMT,
FDD B2 1900MHz PCS blocks A-F,
FDD B3 1800MHz DCS,
FDD B4 1700MHz AWS blocks A-F (AWS-1),
FDD B5 850MHz CLR,
FDD B6 800MHz Japan Cell,
FDD B7 2600MHz IMT-E,
FDD B8 900MHz E-GSM,
FDD B9 1750MHz Japan DCS,
FDD B12 700MHz Lower SMH blocks A/B/C,
FDD B13 700MHz Upper SMH block C,
FDD B17 700MHz Lower SMH blocks B/C,
FDD B19 850MHz Japan upper 800,
FDD B20 800MHz EU Digital Dividend,
FDD B25 1900MHz Extended PCS blocks A-G,
FDD B26 850MHz Extended CLR,
FDD B28 700MHz APT,
TDD B38 2600MHz IMT-E (Duplex Spacing),
TDD B39 1900MHz DCS-IMT gap,
TDD B40 2300MHz,
TDD B41 2500MHz BRS/EBS,
also backward supports HSPA+/HSUPA/HSDPA/WCDMA[Band 1/5/8 (2/3/4/6/9/19 Optional)], CDMA EVDO Rev B/Rev A/CDMA(BC0/BC1), EDGE/GPRS/GSM(Quad Band).
With the built-in 4g module SIM card slot, simply insert a standard 4G SIM/USIM card, the portable WiFi 4G/LTE router works with the downlink speed up to 150Mbps and uplink 50Mbps for fast mobile 4G internet access for sharing with 10 users (recommended, max 254 users theoretically) with 150Mbps WiFi, which is also built inside.
The Built-in Micro SD card slot support up to 32GB capacity. Simply put a Micro SD card then the mobile 4G MiFi wireless LTE router V4G552M/V4G552ML can also works as a WiFi NAS (Network Attached Storage) so that users can access and share the files wirelessly. No need to take a USB storage nor even a USB flash driver for travel! Low-power Energy consumption enables the endurance up to 8~10 hours
The modem router 4g/LTE MiFi modem router supports 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router. With the quick configuration wizard, it is easy to configure and install. The new version of the firmware is upgradable through the web UI.
Key Specification and Features:
3G/4G WiFi Router with Battery V4G552M/V4G552ML |
* Share a 3G/4G mobile WiFi connection |
* Supports TDD/FDD/TD-SCDMA/WCDMA/EVDO standards |
*Supports FDD-LTE: B1/B2/B3/B4/B5/B6/B7/B8/B9/B12/B13/B17/B19/B20/B25/B26/B28(Customizable) |
* Supports TD-LTE: B38/B39/B40/B41(Customizable) |
* Supports WCDMA: B1/B2/B5/B8(Customizable) |
* Supports TD-SCDMA: B40/B41(Customizable) |
* Supports 2.4G WiFi standard 802.11B/G/N |
* WiFi speed up to 150Mbps |
* Supports 5~10 users at the same time |
* 3 operation modes: 3G/4G Router, Travel Router (AP), WISP Client Router |
* 1.44" LCD screen with all useful information(V4G552M only) |
* Interface: 1 x USIM/SIM Card Slot,1 x Micro SD Card Slot |
* Button: 1 x Power On/Off, 1 x WPS, 1 x Reset |
* LED indicators: 1 x 3G/4G, 1 x WiFi, 1 x Power (V4G552ML only) |
* WPS button for fast and security WiFi connection |
* SD card slot for up to 32GB optional storage |
* 2100/3000mAh battery for 10~12 hours working |
* Customized version available |
Notes:
1. The Duplex Modes and Frequency Bands above mentioned does not mean the portable LTE router can support all of them synchronously but some bands included only, since some of them are mutual exclusive; Also the duplex modes(FDD/TDD) and frequency bands are different from area to area, operator to operator, and with different APN settings, etc. No one can cover all frequency bands and APN settings in one device for the whole globe, but we can tailor the duplex modes, frequency bands and APN settings etc for specified operators and regions.
2. Cost floats with the technical requirement and order quantity. So when making an inquiry please make it very certain for the technical data (most important, duplex modes and frequency bands), and order demand so that both sides can go ahead efficiently. Thanks.
{gallery}gallery/v4g552m{/gallery}
Visonicom V4G1205D 4G LTE 11ac 1200Mbps dualband wireless router/wireless CPE gigabit Ethernet is manufactured for fast, stable, and convenient internet service for home and office. The 2T2R 300Mbps 2.4GHz + 2T2R 867Mbps 5GHz 4G WiFi router supports the following 4G/3G/2G radio access technologies: LTE FDD and/or TDD, HSPA+, HSPA, UMTS, EDGE, CDMA2000, GPRS. It supports PPTP, L2TP VPN client and/or PPTP, L2TP VPN pass-through, IGMP proxy and MLD for IPTV, TR069 remote management, and Multiple SSID. Its working modes include AP/gateway, Wireless WDS, Wireless Repeater and Wireless client.
Basic Features:
* Support dual duplex modes FDD and TDD
* Supports multiple 4G/3G/2G Frequency Channels
* 802.11b/g/n 300Mbps + 11ac 867Mbps dualband WiFi
* Gigabit Ethernet Ports
* VPN Support (PPTP, L2TP client and/or PPTP, L2TP pass through)
* Link failover between ADSL(PPPOE, DHCP, Static IP) and 4G is supported
* TR069 Remote Management Support
* IGMP proxy and MLD for IPTV
* Supports AP/gateway, Wireless WDS, Wireless Repeater and Wireless client
* IPV6 Support
* Low-voltage, over current, over voltage, anti-reverse protection
* Configuration couldn’t be easier with native web-server setup.
* Router factory default settings can be configured freely.
* Parameters backup and import
* Static Routing and Port Forwarding
* Support QoS, IP and MAC address filtering
* Support DNS and DDNS
* LEDs for status monitoring
* High gain 5dBi external antenna for WiFi and 4G
V4G1205D LTE Router Product Specifications:
Hardware Parameters | |
Chipset | RTL8197FS+RTL8812BRH+RTL8367 |
CPU Frequency | 1000MHz |
Memory | 64MB or 128MB 16-bit DDR2 SDRAM |
Flash | 8MB |
WiFi | 2T2R 2.4GHz 802.11b/g/n, 300Mbps, 2T2R 5.8GHz 802.11AC, 867Mbps |
Device Interfaces | 1*LTE interface |
4*RJ45 10M/100M/1000M LAN Ethernet interfaces | |
1*RJ45 10M/100M/1000M WAN Ethernet interfaces | |
1*Reset button | |
1*WPS button | |
1*Power jack | |
1*Power switch | |
1X USB 2.0 | |
WiFi Antenna | 2*5dBi external dual-band antenna (2.4G and 5.8G WiFi Antenna Combiner ) |
LTE Antenna | 2*5dBi external antenna |
LTE Support Bands | |
EC25-E | FDD LTE:B1/B3/B5/B7/B8/B20;TDD LTE:B38/B40/B41; |
WCDMA:B1/B5/B8;GSM:900/1800 | |
EC25-V | FDD LTE:B4/B13 |
EC25-A | FDD LTE:B2/B4/B12; WCDMA:B2/B4/B5 |
EC25-AUT | FDD LTE:B1/B3/B5/B7/B28; WCDMA:B1/B5 |
LM923S | TDD LTE: B42, B43+B38 B40 B41 |
SLM750-G1A | FDD LTE: B1/3/5/8 |
SLM750-G2C | FDD LTE: B2/4/5/7/28; WCDMA: B2/4/5; |
SLM750-G2D | FDD LTE: B1/3/5/8; TDD LTE: B40; WCDMA: B1/8, |
SLM750-G2E | FDD LTE: B1/3/5/7/8/20; WCDMA: B1/8, |
Notes: | Bands not listed or need customization? Please contact us. |
WiFi Features | |
Standard | 802.11b/g/n/ac |
11N: 2.4~2.4835GHz, 11AC: 5.150~5.825GHZ | |
Korea, Japan, ETSI, FCC channels can be selected | |
Modulation Schemes | OFDM = BPSK,QPSK, 16-QAM, 64-QAM 256-QAMc |
DSSS = DBPSK, DQPSK, CCK | |
Transfer Rate | HT20: up to 144 Mbps; HT40: up to 300 Mbps; VHT80: up to 866Mbps |
Software Features | |
General | RFC0768 UDP |
RFC0791 IP | |
RFC0792 ICMP | |
RFC0793 TCP | |
RFC0826 Ethernet ARP | |
RFC0894 IP over Ethernet | |
RFC0922 Broadcasting Internet Datagrams | |
RFC0950 Internet Standard Subnetting | |
IEEE802.3 Ethertype | |
IEEE802.1p | |
IEEE 802.11b | |
IEEE 802.11g | |
IEEE 802.11n | |
RFC2516 PPP Over Ethernet (PPPoE) | |
RFC1662 PPP in HDLC-like Framing | |
RFC1332 PPP Internet Protocol Control Protocol | |
RFC1042 A standard for the Transmission of IP Datagrams over IEEE 802 Networks | |
IPoE (a.k.a IP over Ethernet over AAL5) | |
DHCP server, client | |
NAT,NAPT and ALG | |
DMZ and Port forwarding(Virtual server) | |
PPTP, L2TP VPN, OPENSWAN IPSEC VPN | |
IGMP proxy and MLD for IPTV | |
Logs and statistics | |
TR-069 remote management | |
Flexible and secure SPI Firewall, Denial of Service (DoS) protection | |
Port filtering , IP filtering and MAC filtering | |
URL filter | |
QOS Flow Control | |
DDNS | |
IPV6 | |
Static route | |
SNTP Date/time update from Internet Time Server | |
ETH WAN link-backup via 3G/4G module | |
WEB GUI | |
Embedded AP with 4 SSIDs | |
Wireless WDS | |
Wireless Repeater | |
Wireless client mode | |
Separate authentication for each SSID | |
Wireless schedule | |
Environment Requirement | |
Operating Temperature | 0°C~40°C |
Storage Temperature | -20°C ~ 90°C |
Operating Humidity | 5%~95% (typical) |
Power Supply | 12V/1.5A |
EMC/Safety | |
Regulation Compliance | CCC, CE, FCC |
Safety Regulations | UL |
Green Standard | RoHS |
Visonicom V4G330D 4G LTE wireless router/wireless CPE is designed to offer fast, stable, and convenient internet service for home and office. The 2T2R 300Mbps 4G WiFi router desktop supports the following radio access technologies: LTE FDD and/or TDD, HSPA+, HSPA, UMTS, EDGE, CDMA2000, GPRS. It supports PPTP, L2TP VPN client and/or PPTP, L2TP VPN pass-through, IGMP proxy and MLD for IPTV, TR069 remote management, and Multiple SSID. Its working modes include AP/gateway, Wireless WDS, Wireless Repeater and Wireless client.
Basic Features:
* Supports dual duplex modes FDD and TDD
* Supports multiple 4G/3G/2G Frequency Channels
* VPN Support (PPTP, L2TP client and/or PPTP, L2TP pass through)
* Link failover between ADSL(PPPOE, DHCP, Static IP) and 4G is supported
* TR069 Remote Management Support
* IGMP proxy and MLD for IPTV
* Supports AP/gateway, Wireless WDS, Wireless Repeater and Wireless client
* IPV6 Support
* Low-voltage, over current, over voltage, anti-reverse protection
* Configuration couldn’t be easier with native web-server setup.
* Router factory default settings can be configured freely.
* Parameters backup and import
* Static Routing and Port Forwarding
* Support QoS, IP and MAC address filtering
* Support DNS and DDNS
* LEDS for status monitoring
* High gain 5dBi external antenna for WiFi and 4G
* WiFi(802.11b/g/n) 300Mbps
V4G330D LTE Router Product Spec
Hardware Parameters | |||
Chipset | RLT8197FN | ||
CPU Frequency | 800MHz | ||
Memory | 64MB 16-bit DDR2 SDRAM | ||
Flash | 8MB | ||
WiFi | 2T2R 2.4GHz 802.11b/g/n, 300Mbps | ||
Device Interfaces | 1*LTE interface | ||
4*RJ45 10M/100M LAN Ethernet interfaces | |||
1*RJ45 10M/100M WAN Ethernet interfaces | |||
1*Reset button | |||
1*WPS button | |||
1*Power jack | |||
1*Power switch | |||
WiFi Antenna | 2*5dBi external antenna | ||
LTE Antenna | 2*5dBi external antenna | ||
LTE Support Bands | |||
EC25-E | FDD LTE:B1/B3/B5/B7/B8/B20, TDD LTE:B38/B40/B41 | ||
WCDMA:B1/B5/B8, GSM:900/1800 | |||
EC25-V | FDD LTE:B4/B13 | ||
EC25-A | FDD LTE:B2/B4/B12, WCDMA:B2/B4/B5 | ||
EC25-AUT | FDD LTE:B1/B3/B5/B7/B28, WCDMA:B1/B5 | ||
LM923S | TDD LTE: B42, B43+B38 B40 B41 | ||
SLM750-G1A | FDD LTE: B1/3/5/8 | ||
SLM750-G2C | WCDMA: B2/4/5, FDD LTE: B2/4/5/7/28 | ||
SLM750-G2D | WCDMA: B1/8, FDD LTE: B1/3/5/8, TDD LTE: B40 | ||
SLM750-G2E | WCDMA: B1/8, FDD LTE: B1/3/5/7/8/20 | ||
Notes: | Bands not listed or need customization? Please contact us. | ||
WiFi Features | |||
Standard | 802.11b/g/n | ||
2.4~2.4835GHz | |||
Korea, Japan, ETSI, FCC channels can be selected | |||
Modulation Schemes | OFDM = BPSK,QPSK, 16-QAM, 64-QAM | ||
DSSS = DBPSK, DQPSK, CCK | |||
Transfer Rate | HT20: up to 144 Mbps, HT40: up to 300 Mbps | ||
Sensitivity | IEEE 802.11b (dBm) | IEEE 802.11g(dBm) | IEEE 802.11n (dBm) |
11 -85 | 6 -89, 9 -88 | HT 20 | |
5.5 -88 | 12 -85,18 -83 | 0/8 -83, 1/9 -80, 2/10 -78, | |
2 -89 | 24 -80, 36 -76 | 3/11 -75, 4/12 -71, 5/13 -67, | |
1 -91 | 48 -71, 54 -70 | 6/14 -66, 7/15 -65, | |
HT 40 | |||
0/8 -80, 1/9 -77, 2/10 -75, | |||
3/11 -72, 4/12 -68, 5/13 -64, | |||
6/14 -63, 7/15 -62 | |||
Transmitting Power(20MHz) | 802.11n(2.4GHz)(± 2dBm) | 802.11g(± 2dBm) | 802.11b(± 2dBm) |
18dBm@MCS0/MCS8 | 18dBm @ 6~24Mbps | 18dBm @1~11Mbps | |
17dBm@MCS1~2/MCS9~10 | 17dBm @ 36Mbps | ||
17dBm @ MCS3/MCS11 | 15dBm @ 48Mbps | ||
17dBm @ MCS4/MCS12 | 15dBm @ 54Mbps | ||
16dBm @ MCS5/MCS13 | |||
15dBm @ MCS6/MCS14 | |||
15dBm @ MCS7/MCS15 | |||
Software Features | |||
General | RFC0768 UDP | ||
RFC0791 IP | |||
RFC0792 ICMP | |||
RFC0793 TCP | |||
RFC0826 Ethernet ARP | |||
RFC0894 IP over Ethernet | |||
RFC0922 Broadcasting Internet Datagrams | |||
RFC0950 Internet Standard Subnetting | |||
IEEE802.3 Ethertype | |||
IEEE802.1p | |||
IEEE 802.11b | |||
IEEE 802.11g | |||
IEEE 802.11n | |||
RFC2516 PPP Over Ethernet (PPPoE) | |||
RFC1662 PPP in HDLC-like Framing | |||
RFC1332 PPP Internet Protocol Control Protocol | |||
RFC1042 A standard for the Transmission of IP Datagrams over IEEE 802 Networks | |||
IPoE (a.k.a IP over Ethernet over AAL5) | |||
DHCP server, client | |||
NAT,NAPT and ALG | |||
DMZ and Port forwarding(Virtual server) | |||
PPTP, L2TP VPN | |||
IGMP proxy and MLD for IPTV | |||
Logs and statistics | |||
TR-069 remote management | |||
Flexible and secure SPI Firewall, Denial of Service (DoS) protection | |||
Port filtering , IP filtering and MAC filtering | |||
URL filter | |||
QOS Flow Control | |||
DDNS | |||
IPV6 | |||
Static route | |||
SNTP Date/time update from Internet Time Server | |||
ETH WAN link-backup via 3G/4G module | |||
WEB GUI | |||
Embedded AP with 4 SSIDs | |||
Wireless WDS | |||
Wireless Repeater | |||
Wireless client mode | |||
Separate authentication for each SSID | |||
Wireless schedule | |||
Environment Requirement | |||
Operating Temperature | 0°C~40°C | ||
Storage Temperature | -20°C ~ 90°C | ||
Operating Humidity | 5%~95% (typical) | ||
Power Supply | 12V/1.5A | ||
EMC/Safety | |||
Regulation Compliance | CCC,CE, FCC | ||
Safety Regulations | UL | ||
Green Standard | RoHS |
Visonicom VMD-EZ604M EZCast dongle for mobile is a 11ac 600Mbps dualband WiFi HDMI dongle for mobile devices such as Android phones and tablet PC, iPhone and iPad families. It supports the most popular WiFi display protocols of Miracast WiFi display, AirPlay mirroring, and DLNA! With this exciting AirPlay mirroring gadget you can display everything on big HDTV screen whatever displays now on the small screen of your iPhone, iPad, Android smart phones, tablet PC, etc. Thus you can easily enjoy movies, play games, surf internet, view photos on TV with the WiFi AirPlay receiver while operate your smart devices.
The Miracast WiFi display adapter comes with HDMI v1.3 interface for up to 1080P high definition media transfer, and external 600Mbps 11ac WiFi module(11n-2.4G/5G 150Mbps + 11ac-5G 433Mbps) with high gain antenna enables seamless streaming of heavy data transmission between the Miracast receiver and your Android smart phones and tablet PCs wirelessly.
VMD-EZ604M Miracast adapter can create a WiFi-Direct connection with any Android device with WiFi-Direct support and Android 4.2 (Jelly Bean) operating system or greater.
The latency of the Miracast HDMI dongle is as low as 80 milliseconds, fast enough to be able to playback videos itself. The WiFi display dongle is easy to use-there’s no password or anything, and no client software is needed to install for Miracast, AirPlay support.
Last but not least, it supports AirPlay to mirror and/or push content from your iPhone/iPad to HDTV! No APP installation needed.
Specification:
Product | Miracast AirPlay DLNA Dongle VMD-EZ604M |
CPU | Actions AM8252 |
Architecture | HD video decoder (1080p @ 60fps) |
GPU offers 3D graphic with OpenGL ES2.0 and OpenVG 1.1 | |
2D/3D GPU (1 x mali 400) | |
HDMI 1.3 | |
OS | Linux3.0.8+ |
Wi-Fi | External 802.11n 2.4/5GHz 150Mbps + 11ac 5GHz 433Mbps |
WiFi Display Support | Miracast, for Android 4.2 and above device |
AirPlay, for iOS6 and above | |
DLNA, DMR, for device with DLNA-support software installed | |
OS Support | Android 4.0+(DLNA), iOS6+(DLNA) |
Android 4.2+(Miracast), iOS7+(AirPlay) | |
I/O Port | HDMI: HDMI 1.3 for HD Video/Audio output |
Micro USB port: For power supply | |
Media Support | Audio: MP3,WMA,WAV,OGG,AAC,FLAC,3GP… |
Video: MPEG1/2/4,AVI,WMV,MKV,MOV,RM,RMVB,MP4…HDCP Support | |
Picture: JPG,BMP,PNG… | |
Power Supply | DC 5v/0.5A(1A prefer) |
Accessories | 1*Micro USB cable with WiFi Module |
1* User manual |
For retail sales please refer to our official online stores:
Please kindly note that we never sell at multi-vendor retail sites, nor sell to the sellers on multi-vendor retail sites, thus we are not responsible for them.
Visonicom VMD-EZ152M EZCast dongle for mobile device is a WiFi HDMI dongle for mobile devices such as Android phones and tablet PC, iPhone and iPad families. It supports the most popular WiFi display protocols of Miracast WiFi display, AirPlay mirroring, and DLNA! With this exciting AirPlay mirroring gadget you can display everything on big HDTV screen whatever displays now on the small screen of your iPhone, iPad, Android smart phones, tablet PC, etc. Thus you can easily enjoy movies, play games, surf internet, view photos on TV with the WiFi AirPlay receiver while operate your smart devices.
VMD-EZ152M Miracast adapter can create a WiFi-Direct connection with any Android device with WiFi-Direct support and Android 4.2 (Jelly Bean) operating system or greater.
The latency of the Miracast HDMI dongle is as low as 80 milliseconds, fast enough to be able to playback videos itself. The WiFi display dongle is easy to use-there’s no password or anything, and no client software is needed to install for Miracast, AirPlay support.
The Miracast WiFi display adapter comes with HDMI v1.3 interface for up to 1080P high definition media transfer, and external 150Mbps 11n WiFi module with built-in high gain antenna enables seamless streaming of heavy data transmission between the Miracast receiver and your Android smart phones and tablet PCs wirelessly.
Last but not least, it supports AirPlay to mirror and/or push content from your iPhone/iPad to HDTV!
Specification:
Product | Miracast AirPlay DLNA Dongle VMD-EZ152M |
CPU | Actions AM8252 |
Architecture | HD video decoder (1080p @ 60fps) |
GPU offers 3D graphic with OpenGL ES2.0 and OpenVG 1.1 | |
2D/3D GPU (1 x mali 400) | |
HDMI 1.3 | |
OS | Linux3.0.8+ |
Wi-Fi | External 802.11b/g/n 150Mbps 2.4GHz |
WiFi Display Support | Miracast, for Android 4.2 and above device |
AirPlay, for iOS6 and above | |
DLNA, DMR, for device with DLNA-support software installed | |
OS Support | Android 4.0+(DLNA), iOS6+(DLNA) |
Android 4.2+(Miracast), iOS7+(AirPlay) | |
I/O Port | HDMI: HDMI 1.3 for HD Video/Audio output |
Micro USB port: For power supply | |
Media Support | Audio: MP3,WMA,WAV,OGG,AAC,FLAC,3GP… |
Video: MPEG1/2/4,AVI,WMV,MKV,MOV,RM,RMVB,MP4…HDCP Support | |
Picture: JPG,BMP,PNG… | |
Power Supply | DC 5v/0.5A(1A prefer) |
Accessories | 1*Micro USB cable with WiFi module |
1* User manual |
For retail sales please refer to our official online stores:
Please kindly note that we never sell at multi-vendor retail sites, nor sell to the sellers on multi-vendor retail sites, thus we are not responsible for them.